Product Feature: LATAPOXY® 310 Stone Adhesive

LATAPOXY® 310 Stone Adhesive is a two component, high strength epoxy adhesive. Engineered, formulated and optimised for the spot bonding fixing method of installing tile and stone on vertical surfaces. LATAPOXY 310 Stone Adhesive maintains its non-sag consistency at high working temperatures up to 35°C. Interior, exterior, wet areas, walls, ceilings and soffits.

Key Features:

• Fast permanent bond - 45 minutes to 1 hour set time
• Easy to use - 1:1 mixing ratio by volume
• Non-staining - ideal for white and light coloured marbles, other stones and tiles
• Withstands shock and vibration
• Durable permanent bond, will not deteriorate over time
• Safe - no solvents
• Non-sag - when applied up to 25 mm thick

For more product information click here, or read Technical Data Sheet TDS-1158.

Are you getting ready to start a project? Contact us about your next project or to arrange free samples. Call 1800 331 012 or email us here.

Residential Pool in Mosman

This private pool in Mosman, NSW, is being renovated by Sydney Pool Renovations. Craig Hunter, LATICRETE Technical Sales Rep, submitted these photos of the project currently in progress. Sydney Pool Renovators are using the below LATICRETE products on this 100m2 pool project.

• 3701 Fortified Mortar Bed is a polymer fortified blend of carefully selected polymers, Portland cement and graded aggregates. 3701 Fortified Mortar Bed does not require the use of latex admix, you only need to add water to produce thick bed mortar with exceptional strength.
• 335 Premium Flexible Adhesive is a high performance thin-bed adhesive for installation a wide range of tile and stone for exterior and underwater applications. 
• LATAPOXY® Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates.
• HYDRO BAN® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
• HYDRO BAN®  Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant. Particularly for use under HYDRO BAN Waterproof Membrane as a transition fillet and crack filler. 
• PERMACOLOR® Grout - offers the maximum performance available in a cement based grout, providing consistent colour and antimicrobial protection to resist stain-causing mould and mildew. PERMACOLOR Grout is easy to install - just mix with water.

Keep your eyes peeled for further updates on this project!

Click here to view/download the LATICRETE Pools, Spas and Fountains System Brochure.

Are you getting ready to start a pool project? Contact us to discuss your next project or arrange a demo. Call 1800 331 012 or email us here.

Moisture Vapour Emission, Relative Humidity and Testing of Concrete

Image depicts a wet substrate that didnt allow the membrane to cure and
resulted in a damaged,  delaminated membrane.

Materials used in tile and stone installation applications can be affected by moisture during the installation and curing phases. Some materials, such as waterproofing membranes, may not cure properly or may delaminate from a continually wet substrate, or a substrate with a high moisture vapour emission rate (MVER). A substrate which is damp or has a high MVER may also contribute to the formation of efflorescence. Concrete with a high moisture vapour emission rate may also have an impact on a tile or stone installation.

There are generally three quantative tests that are used to determine moisture content in concrete and one qualitative test to show that moisture is present.

1. Calcium Chloride (ASTM F1869 - Standard Test Method for Measuring Moisture Vapour Emission Rate of Concrete Subfloors using Anhydrous Calcium Chloride). 

The Calcium Chloride test involves placing a Petri dish of calcium chloride (covered by a plastic dome adhered to the concrete) on the concrete and allowing the Petri dish to remain in place between 60-72 hours. The calcium chloride absorbs any moisture capour that transmits through the concrete within the plastic dome. The results of a calcium chloride test measures the amount of moisture absorbed and results are stated in pounds per 92.9 m2 in a 24-hour period. Please note that the ASTM F1860 test should only be conducted in interior conditions when the building is completely enclosed and the air conditioning or heating system is turned on, unless otherwise instructed by the test kit manufacturer. This is not a rest recommended for exterior use. 

2. Relative Humidity ( ASTM F2170 – Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs using In-situ Probes)

The Relative Humidity (RH) test involves placing probes in the concrete and taking readings with a hygrometer. A relative humidity reading of 75% or below is acceptable for most tile applications. Please note that the ASTM F1860 test should only be conducted  in interior conditions when the building is completely enclosed and the air conditioning or heating system is turned on, unless otherwise instructed by the probe manufacturer. This test is not recommended for exterior use. 

To continue reading Technical Data Sheet TDS-1166 click here. 

Contact us on 1800 331 012 to discuss your next project, arrange a demo, request FREE samples or for technical support or contact us here.

STONETECH BulletProof® Sealer

STONETECH BulletProof® Sealer delivers maximum protection against the toughest stains while preserving the natural look of natural stone surfaces. A water-based formula for interior and exterior use.

• Advanced penetrating micro-bond protection
• Natural looking - does not alter the look of stone or tile
• Maximum protection against oil and water-based stains
• Interior and exterior applications
• Water-based, low VOC, low odour, environmentally friendly

STONETECH BulletProof Sealer is suitable for natural stone surfaces such as granite, limestone, travertine, sandstone, basalt/bluestone, as well as concrete and masonry. Click here for more info.

View/download:

STONETECH Surface Care Product Selection Guide

STONETECH Stone & Tile Care Guide

If you have any questions regarding the use, installation or maintenance of STONETECH  contact  LATICRETE 1800 331 012 or email: sales@laticrete.com.au.

Canberra Residential Pool

The team at Prestige Pools is currently working on this 139m2 pool for a residential home in Canberra, ACT. The project features Bisazza mosaic tiles, which has been installed using a range of LATICRETE materials, including LATAPOXY® SP-100 as a grout and coloured epoxy adhesive.  

Products used:

• 3701 Mortar Admix is a specially designed latex admixture for use with thin-set adhesives, cement grouts, cement mortar beds and other cement mixes.

• LATAPOXY® Moisture Shield is a 2 component, roller applied epoxy coating specifically designed to reduce moisture vapour emissions in concrete and other substrates.

• HYDRO BAN® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
• LATAPOXY® SP-100 is a stainless, pigment free, colourfast epoxy grout for grouting floor installations of ceramic tile, brick, and stone.

Click here to view/download the LATICRETE Pools, Spas and Fountains System Brochure.

Are you getting ready to start a pool project? Contact us to discuss your next project or arrange a demo or FREE samples. Call 1800 331 012 or email us here.

Community Mosaic Mural Finished

In August last year, we shared a blog on Sandy and Dave Robertson from Oz Mosaics who travelled to Talwood State School in QLD, to create a community mosaic mural in celebrating the centenary of the school. 

The current P & C committee, together with a grant from the Regional Arts Development Fund, enlisted mosaic artist, Oz Mosaics to help design and complete a 2.4m x 1.8m mosaic mural, where LATICRETE products were used in depicting the school and community. "Many thanks to LATICRETE Australia for their donation of LATICRETE products for this amazing mosaic project." ~ Sandy Robertson 

The project took over 2 weeks to complete with contributions coming from current students and staff, past students and community members. The mural is installed on the school building and a beautiful mosaic pedestal was also created by the students.

The design was based on ideas from students and staff, and represented the school as the centre of the community with the local agricultural industries and landmarks surrounding it. Incorporated in the mosaic were local materials, with a past student racing home to grind off a portion of a 1950 FJ Holden bumper bar to use as part of a grain silo in the mosaic.

The town of Talwood was originally established to support the workers building the railway line. The first school started its humble beginnings as a tent school, with 16 students from the railway camp.

The school building was built some 8 years later and opened on 4th November 1918. It was a simple structure with no fence surrounding it and very few trees. The local stock were often found roaming the school grounds. 

The school of Talwood today, is a 2 teacher school with 30 students. The town has a population of 50 with the main features being a shop, pub and church. The region continues to be underpinned by the agricultural industries of cotton, wheat, cattle and sheep. 

LATICRETE installation materials used for this mural project were:

• 335 Premium Flexible Adhesive - a high performance thin-bed adhesive for the installation of a wide range of tile and stone for exterior and underwater applications.
• 4237 Latex Additive - a specially designed latex additive for use with 211 Crete Filler Powder to make a high strength latex thin and medium bed adhesive up to 15 mm, for installing all types of tile, stone and agglomerates.
• HYDRO BAN® - a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, covers or corners. HYDRO BAN is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
• PERMACOLOR® Grout - offers the maximum performance available in a cement based grout, providing consistent colour and antimicrobial protection to resist stain-causing mould and mildew. PERMACOLOR Grout is easy to install - just mix with water.

Are you getting ready to start a project? Contact us to discuss your next project. Call 1800 331 012 or email sales@laticrete.com.au.

LATICRETE Pool Tiling Systems

The LATICRETE Pool, Spa & Fountain Tiling Systems brochure provides an overview of tile & stone installation materials to facilitate your selection of appropriate waterproofing, adhesives, mortars, grouts and sealants.    

The LATICRETE Systems available are from job proven LATICRETE tile installation projects which have been successfully installed around the world for over 60 years. LATICRETE provides single source responsibility for these demanding, high performance applications. LATICRETE Systems offers the latest technology in construction materials, methods and delivers superior performance.

Click here to view/download the Pool, Spa & Fountain Tiling Systems brochure. 

For more information on LATICRETE trouble free installation products, training, or technical support, contact your local LATICRETE representative on 1800 331 012 - or email: sales@laticrete.com.au.