Wednesday 8 April 2020

Is Your Stone Sealed?



Determining if a stone is sealed is an important question that must be answered prior to considering the application of a new sealer treatment. Realizing if an unsealed stone surface will be able to accept a sealer is also important in determining how to move forward. 

There is a very simple and inexpensive test to determine if the stone, Saltillo tile or cement-based grout is currently sealed, or if it even requires a sealer.

Water Test: 
A quick and easy test is performed with water and can provide valuable information about the current state of the stone or grout surface. 
  1. Apply water in a few different areas of the stone and/or grout 
  2. Make each application of water approximately 25mm wide 
  3. Roughly measure the size of the circle of water without making contact with the water. Make a notation as to the size of each application of water 
  4. Place a drinking glass over each application of water to protect from evaporation 
  5. Let sit undisturbed for 20 min 
  6. After 20 minutes remove the glass(es) and observe the results: 
No change - If the water appears the same as when it was applied and the water measures the same diameter, then a sealer is already present or the stone is very dense and does not need a sealer. 

Slight change - If the water is still present in a bead but appears to be absorbing into the surface then a sealer may already be present but requires resealing, or, the stone is not sealed and is dense enough to allow for the slow absorption of water 

Complete change - If the water is completely absorbed into the surface and the spot appears to have grown in size then the stone is not sealed and the use of a high-quality sealer (e.g. STONETECH® BulletProof® SealerSTONETECH Heavy Duty SealerSTONETECH Impregnator Pro® Sealer, etc) is strongly recommended. Continue reading Technical Data Sheet TDS-1261.

View/download:

If you have any questions regarding the use, installation or maintenance of STONETECH or sealed stone, please contact LATICRETE Technical Services on 1800 331 012.

No comments:

Post a Comment