Wednesday 12 April 2017

Wet Film Thickness Gauge Usage


The video shown above demonstrates the proper way to use a HYDRO BAN® Wet Film Gauge. When installing liquid style waterproofing membranes, anti- fracture membranes, vapor reduction membranes, paints or other construction liquids the method to measure the materials installation thickness is with a tool called a Wet Film Gauge. The Wet Film Gauge will measure thickness of liquids in mils and assists the installer in knowing that the installation thickness is correct.

Use your HYDRO BAN Wet Film Gauge with HYDRO BANa thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.

Key Features
  • Meets and exceeds the requirements of AS4858 and AS4654.1 for a Class 3 Membrane
  • Thin; only 0.5 mm – 0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • Rapid drying for a faster time to tile
  • Install tile, brick and stone directly onto membrane

For more information on using LATICRETE in your projects, product demos, samples or technical support please contact LATICRETE on 1800 331 012, email sales@laticrete.com.au or visit www.laticrete.com.au.

1 comment: