HYDRO BAN® is a thin, load-bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates. HYDRO BAN is a certified low VOC emitting product. HYDRO BAN is an extensible Class 3 membrane suitable for immersed installations, internal wet areas, and external above-ground use.
HYDRO BAN features rapid drying time for a faster time to tile and changes colour from a light sage to an olive green when cured.
Key Features
- Meets and exceeds the requirements of AS4858 and AS4654.1
- Thin; only 0.6 mm - 0.9 mm thick when cured
- Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
- "Extra Heavy Service" rating per ASTM C627 "Robinson Floor Test"
- IAPMO approved
- Inhibits stain-causing mould and mildew growth in the substrate with antimicrobial product protection.
- Safe - no solvents and non-flammable
Click here for more product information or see Product Data Sheet DS-1036.
Are you getting ready to start a project? Contact us about your next project - Call 1800 331 012 or email us here.
No comments:
Post a Comment