Waterproof your project with HYDRO BAN®!

Contractor: The Orchid Group

HYDRO BAN® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component, self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates. HYDRO BAN is a certified low VOC emitting product. HYDRO BAN is extensible Class 3 membrane suitable for immersed installations, internal wet areas and external above ground use.

HYDRO BAN features rapid drying time for a faster time to tile, and changes colour from a light sage to an olive green when cured.

Key Features

• Meets and exceeds the requirements of AS4858 and AS4654.2 for a Class 3 Membrane

• Thin; only 0.5 mm - 0.8 mm thick when cured

• Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks

• "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)

• IAPMO approved

• Contains antimicrobial product protection

• Safe - no solvents and non-flammable

Click here for more product information or see Product Data Sheet DS-1036

Are you getting ready to start a project? Contact us about your next project or to arrange FREE samples. Call 1800 331 012 or email us here.